Skip to content

NetSuite Query

The NetSuite Query component uses the NetSuite API to retrieve data and load it into a table—this stages the data, so the table is reloaded each time. You can then use transformation components to enrich and manage the data in permanent tables.

Note

Visit the NetSuite schema browser for a detailed list of NetSuite data sources.

Note

You may find that your NetSuite data retrieval from a single table is limited to 100,000 rows. To retrieve more than 100,000 rows, SuiteAnalytics Connect must be enabled on your NetSuite account.

Warning

From version 1.54 of Matillion ETL, the original NetSuite Query component has been deprecated and replaced with a new version. The new component uses only OAuth as an authentication type. The following component properties are no longer applicable:

  • Authentication Method
  • Account ID
  • User
  • Password

The deprecated version of the component (and the properties listed above) will persist for any of your existing orchestration jobs.

Warning

This component is potentially destructive. If the target table undergoes a change in structure, it will be recreated. Otherwise, the target table is truncated. Setting the load option Recreate Target Table to Off will prevent both recreation and truncation. Do not modify the target table structure manually.

Properties

Name = string

A human-readable name for the component.

Basic/Advanced Mode = drop-down

  • Basic: This mode will build a query for you using settings from the Data Source, Data Selection, and Data Source Filter parameters. In most cases, this mode will be sufficient.
  • Advanced: This mode will require you to write an SQL-like query to call data from NetSuite. The available fields and their descriptions are documented in the data model.

There are some special pseudo columns that can form part of a query filter, but are not returned as data. This is fully described in the data model.

Note

While the query is exposed in an SQL-like language, the exact semantics can be surprising, for example, filtering on a column can return more data than not filtering on it. This is an impossible scenario with regular SQL.

Use Sandbox = boolean

  • No: Connect to a live NetSuite account. This is the default setting.
  • Yes: Connect to a sandbox NetSuite account.

Authentication = drop-down

Select an OAuth entry to authenticate this component. An OAuth entry must be set up in advance. To learn how to create and authorize an OAuth entry, please read our NetSuite Query authentication guide.

Connection Options = column editor

  • Parameter: A JDBC parameter supported by the database driver. The available parameters are explained in the data model. Manual setup is not usually required, since sensible defaults are assumed.
  • Value: A value for the given Parameter.

SQL Query = code editor

Input an SQL-like query, written according to the data model.

This property is only available when Basic/Advanced Mode is set to Advanced.

Data Source = drop-down

Select a data source.

Data Selection = dual listbox

Choose one or more columns to return from the query. The columns available are dependent upon the data source selected. Move columns left-to-right to include in the query.

Data Source Filter = column editor

  • Input Column: Select an input column. The available input columns vary depending upon the data source.
  • Qualifier:
    • Is: Compares the column to the value using the comparator.
    • Not: Reverses the effect of the comparison, so "Equals" becomes "Not equals", "Less than" becomes "Greater than or equal to", etc.
  • Comparator: Choose a method of comparing the column to the value. Possible comparators include: "Equal to", "Greater than", "Less than", "Greater than or equal to", "Less than or equal to", "Like", "Null". "Equal to" can match exact strings and numeric values, while other comparators, such as "Greater than" and "Less than", will work only with numerics. The "Like" operator allows the wildcard character [%] to be used at the start and end of a string value to match a column. The Null operator matches only null values, ignoring whatever the value is set to. Not all data sources support all comparators, meaning that it is likely that only a subset of the above comparators will be available to choose from.
  • Value: The value to be compared.

Combine Filters = drop-down

Select whether to use the defined filters in combination with one another according to either And or Or.

Limit = integer

Set a numeric value to limit the number of rows that are loaded.

Type = drop-down

  • External: The data will be put into your storage location and referenced by an external table.
  • Standard: The data will be staged in your storage location before being loaded into a table. This is the default setting.

Primary Keys = dual listbox

Select one or more columns to be designated as the table's primary key.

Warehouse = drop-down

The Snowflake warehouse used to run the queries. The special value, [Environment Default], will use the warehouse defined in the environment. Read Overview of Warehouses to learn more.

Database = drop-down

The Snowflake database. The special value, [Environment Default], will use the database defined in the environment. Read Databases, Tables and Views - Overview to learn more.

Schema = drop-down

The Snowflake schema. The special value, [Environment Default], will use the schema defined in the environment. Read Database, Schema, and Share DDL to learn more.

Target Table = string

The name of the table to be created.

Warning

This table will be recreated and will drop any existing table of the same name.

Stage = drop-down

Select a managed stage. The special value, [Custom], will create a stage "on the fly" for use solely within this component.

Stage Platform = drop-down

Select a staging setting.

  • Snowflake Managed: Create and use a temporary internal stage on Snowflake for staging the data. This stage, along with the staged data, will cease to exist after loading is complete.
  • Existing Amazon S3 Location: Activates the S3 Staging Area property, allowing users to specify a custom staging area on Amazon S3. The Stage Authentication property is also activated, letting users select a method of authenticating the data staging.
  • Existing Azure Blob Storage Location: Activates the Storage Account and Blob Container properties, allowing users to specify a custom staging location on Azure. The Stage Authentication property is also activated, letting users select a method of authenticating the data staging.
  • Existing Google Cloud Storage Location: Activates the GCS Staging Area property, allowing users to specify a custom staging area within Google Cloud Storage.

Stage Authentication = drop-down

Select an authentication method for data staging.

  • Credentials: Uses the credentials configured in the environment. If no credentials have been configured, an error will occur.
  • Storage Integration: Use a Snowflake storage integration to authentication data staging. A storage integration is a Snowflake object that stores a generated identity and access management (IAM) entity for your external cloud storage, along with an optional set of allowed or blocked storage locations. To learn more, read Create Storage Integration.

Storage Integration = drop-down

Select a Snowflake storage integration from the drop-down list. Storage integrations are required to permit Snowflake to read data from and write to your cloud storage location (Amazon S3, Azure Blob Storage, Google Cloud Storage) and must be set up in advance of selection. To learn more about setting up a storage integration for use in Matillion ETL, read Storage Integration Setup Guide. Only available when Stage Authentication is set to Storage Integration.

S3 Staging Area = S3 bucket

Select an S3 bucket for temporary storage. Ensure your access credentials have S3 access and permission to write to the bucket. Read Manage Credentials for details on setting up access. The temporary objects created in this bucket will be removed again after the load completes, they are not kept.

Use Accelerated Endpoint = boolean

When True, data will be loaded via the s3-accelerate endpoint. Please consider the following information:

  • Enabling acceleration can enhance the speed at which data is transferred to the chosen S3 bucket. However, enhanced speed is not always guaranteed. Please consult Amazon S3 Transfer Acceleration Speed Comparison to compare S3 Direct versus S3 Accelerated Transfer speeds.
  • Users must manually set the acceleration configuration of an existing bucket. To learn more, see PutBucketAccelerateConfiguration in the API Reference, available at the AWS documentation.
  • This property is only available if the selected S3 bucket has Amazon S3 Transfer Acceleration enabled. For more information, including how to enable this feature, read Getting started with Amazon S3 Transfer Acceleration.
  • Cases may arise where Matillion ETL cannot determine whether the chosen S3 bucket has Amazon S3 Transfer Acceleration enabled. In these cases, Matillion ETL will reveal this property for user input on a "just in case" basis. In these cases, Matillion ETL may return a validation message that reads "OK - Bucket could not be validated." You may also encounter cases where, if you do not have permission to get the status of the acceleration configuration (namely, the permission, GetAccelerateConfiguration) Matillion ETL will again show this property "just in case".
  • The default setting is False.

Storage Account = drop-down

Select a storage account with your desired blob container to be used for staging the data. For more information, read Storage account overview.

Blob Container = drop-down

Select a Blob container to be used for staging the data. For more information, read Introduction to Azure Blob storage.

GCS Staging Area = drop-down

The URL and path of the target Google Storage bucket to be used for staging the queried data. For more information, read Creating storage buckets

Encryption = drop-down

Decide how the files are encrypted inside the S3 bucket. This property is available when using an existing Amazon S3 location for staging.

KMS Key ID = drop-down

The ID of the KMS encryption key you have chosen to use in the Encryption property.

Load Options = multiple drop-downs

  • Clean Staged Files: Destroy staged files after loading data. Default is On.
  • String Null is Null: Converts any strings equal to null into a null value. This is case-sensitive and only works with entirely lower-case strings. Default is Off.
  • Recreate Target Table: Choose whether the component recreates its target table before the data load. If Off, the existing table will be used. Default is On.
  • File Prefix: Give staged file names a prefix of your choice. Default is empty (no prefix).
  • Trim String Columns: Remove leading and trailing characters from a string column. Default is On.
  • Compression Type: Set the compression type to either gzip (default) or None.
  • Use Grid Variable: Check this checkbox to use a grid variable. This box is unchecked by default.

New Table Name = string

The name of the new table to be created. Only available when Type is set to External.

Stage Database = drop-down

Specify the stage database. The special value, [Environment Default], will use the database defined in the environment. Only available when Type is set to External.

Stage Schema = drop-down

Specify the stage schema. The special value, [Environment Default], will use the schema defined in the environment. Only available when Type is set to External.

Stage = drop-down

Select a stage. Only available when Type is set to External.

Auto Debug = drop-down

Choose whether to automatically log debug information about your load. These logs can be found in the task history and should be included in support requests concerning the component. Turning this on will override any debugging connection options.

Debug Level = drop-down

The level of verbosity with which your debug information is logged. Levels above 1 can log huge amounts of data and result in slower execution.

  1. Will log the query, the number of rows returned by it, the start of execution and the time taken, and any errors.
  2. Will log everything included in Level 1, plus cache queries and additional information about the request, if applicable.
  3. Will additionally log the body of the request and the response.
  4. Will additionally log transport-level communication with the data source. This includes SSL negotiation.
  5. Will additionally log communication with the data source, as well as additional details that may be helpful in troubleshooting problems. This includes interface commands.

Name = string

A human-readable name for the component.

Basic/Advanced Mode = drop-down

  • Basic: This mode will build a query for you using settings from the Data Source, Data Selection, and Data Source Filter parameters. In most cases, this mode will be sufficient.
  • Advanced: This mode will require you to write an SQL-like query to call data from NetSuite. The available fields and their descriptions are documented in the data model.

There are some special pseudo columns that can form part of a query filter, but are not returned as data. This is fully described in the data model.

Note

While the query is exposed in an SQL-like language, the exact semantics can be surprising, for example, filtering on a column can return more data than not filtering on it. This is an impossible scenario with regular SQL.

Use Sandbox = boolean

  • No: Connect to a live NetSuite account. This is the default setting.
  • Yes: Connect to a sandbox NetSuite account.

Authentication = drop-down

Select an OAuth entry to authenticate this component. An OAuth entry must be set up in advance. To learn how to create and authorize an OAuth entry, please read our NetSuite Query authentication guide.

Connection Options = column editor

  • Parameter: A JDBC parameter supported by the database driver. The available parameters are explained in the data model. Manual setup is not usually required, since sensible defaults are assumed.
  • Value: A value for the given Parameter.

SQL Query = code editor

Input an SQL-like query, written according to the data model.

This property is only available when Basic/Advanced Mode is set to Advanced.

Data Source = drop-down

Select a data source.

Data Selection = dual listbox

Choose one or more columns to return from the query. The columns available are dependent upon the data source selected. Move columns left-to-right to include in the query.

Data Source Filter = column editor

  • Input Column: Select an input column. The available input columns vary depending upon the data source.
  • Qualifier:
    • Is: Compares the column to the value using the comparator.
    • Not: Reverses the effect of the comparison, so "Equals" becomes "Not equals", "Less than" becomes "Greater than or equal to", etc.
  • Comparator: Choose a method of comparing the column to the value. Possible comparators include: "Equal to", "Greater than", "Less than", "Greater than or equal to", "Less than or equal to", "Like", "Null". "Equal to" can match exact strings and numeric values, while other comparators, such as "Greater than" and "Less than", will work only with numerics. The "Like" operator allows the wildcard character [%] to be used at the start and end of a string value to match a column. The Null operator matches only null values, ignoring whatever the value is set to. Not all data sources support all comparators, meaning that it is likely that only a subset of the above comparators will be available to choose from.
  • Value: The value to be compared.

Combine Filters = drop-down

Select whether to use the defined filters in combination with one another according to either And or Or.

Limit = integer

Set a numeric value to limit the number of rows that are loaded.

Catalog = drop-down

Select a Databricks Unity Catalog. The special value, [Environment Default], will use the catalog specified in the Matillion ETL environment setup. Selecting a catalog will determine which databases are available in the next parameter.

Database = drop-down

Select the Delta Lake database. The special value, [Environment Default], will use the database specified in the Matillion ETL environment setup.

Target Table = string

The name of the table to be created.

Warning

This table will be recreated and will drop any existing table of the same name.

Stage Platform = drop-down

Select a staging setting.

  • AWS S3: Activates the S3 Staging Area property, allowing users to specify a custom staging area on Amazon S3.
  • Azure Blob: Activates the Storage Account and Blob Container properties, allowing users to specify a custom staging location on Azure.
  • Personal Staging: Uses a Databricks personal staging location. Your Matillion ETL environment connection to Delta Lake on Databricks requires your username to be token and the corresponding password to be a masked entry for a Databricks access token (AWS). If you're on Azure, the token is already set. Read Authentication using Azure Databricks personal access tokens.

Additionally, read Configure Unity Catalog storage account for CORS to learn how to configure CORS to enable Databricks to manage personal staging locations in Unity Catalog (AWS). If you're using Azure, read Configure Unity Catalog storage account for CORS.

S3 Staging Area = S3 bucket

Select an S3 bucket for temporary storage. Ensure your access credentials have S3 access and permission to write to the bucket. Read Manage Credentials for details on setting up access. The temporary objects created in this bucket will be removed again after the load completes, they are not kept.

Storage Account = drop-down

Select a storage account with your desired blob container to be used for staging the data. For more information, read Storage account overview.

Blob Container = drop-down

Select a Blob container to be used for staging the data. For more information, read Introduction to Azure Blob storage.

Encryption = drop-down

Decide how the files are encrypted inside the S3 bucket. This property is available when using an existing Amazon S3 location for staging.

KMS Key ID = drop-down

The ID of the KMS encryption key you have chosen to use in the Encryption property.

Load Options = multiple drop-downs

  • Clean Staged Files: Destroy staged files after loading data. Default is On.
  • String Null is Null: Converts any strings equal to null into a null value. This is case-sensitive and only works with entirely lower-case strings. Default is Off.
  • Recreate Target Table: Choose whether the component recreates its target table before the data load. If Off, the existing table will be used. Default is On.
  • File Prefix: Give staged file names a prefix of your choice. Default is empty (no prefix).
  • Compression Type: Set the compression type to either gzip (default) or None.
  • Use Grid Variable: Check this checkbox to use a grid variable. This box is unchecked by default.

Auto Debug = drop-down

Choose whether to automatically log debug information about your load. These logs can be found in the task history and should be included in support requests concerning the component. Turning this on will override any debugging connection options.

Debug Level = drop-down

The level of verbosity with which your debug information is logged. Levels above 1 can log huge amounts of data and result in slower execution.

  1. Will log the query, the number of rows returned by it, the start of execution and the time taken, and any errors.
  2. Will log everything included in Level 1, plus cache queries and additional information about the request, if applicable.
  3. Will additionally log the body of the request and the response.
  4. Will additionally log transport-level communication with the data source. This includes SSL negotiation.
  5. Will additionally log communication with the data source, as well as additional details that may be helpful in troubleshooting problems. This includes interface commands.

Name = string

A human-readable name for the component.

Basic/Advanced Mode = drop-down

  • Basic: This mode will build a query for you using settings from the Data Source, Data Selection, and Data Source Filter parameters. In most cases, this mode will be sufficient.
  • Advanced: This mode will require you to write an SQL-like query to call data from NetSuite. The available fields and their descriptions are documented in the data model.

There are some special pseudo columns that can form part of a query filter, but are not returned as data. This is fully described in the data model.

Note

While the query is exposed in an SQL-like language, the exact semantics can be surprising, for example, filtering on a column can return more data than not filtering on it. This is an impossible scenario with regular SQL.

Use Sandbox = boolean

  • No: Connect to a live NetSuite account. This is the default setting.
  • Yes: Connect to a sandbox NetSuite account.

Authentication = drop-down

Select an OAuth entry to authenticate this component. An OAuth entry must be set up in advance. To learn how to create and authorize an OAuth entry, please read our NetSuite Query authentication guide.

Connection Options = column editor

  • Parameter: A JDBC parameter supported by the database driver. The available parameters are explained in the data model. Manual setup is not usually required, since sensible defaults are assumed.
  • Value: A value for the given Parameter.

SQL Query = code editor

Input an SQL-like query, written according to the data model.

This property is only available when Basic/Advanced Mode is set to Advanced.

Data Source = drop-down

Select a data source.

Data Selection = dual listbox

Choose one or more columns to return from the query. The columns available are dependent upon the data source selected. Move columns left-to-right to include in the query.

Data Source Filter = column editor

  • Input Column: Select an input column. The available input columns vary depending upon the data source.
  • Qualifier:
    • Is: Compares the column to the value using the comparator.
    • Not: Reverses the effect of the comparison, so "Equals" becomes "Not equals", "Less than" becomes "Greater than or equal to", etc.
  • Comparator: Choose a method of comparing the column to the value. Possible comparators include: "Equal to", "Greater than", "Less than", "Greater than or equal to", "Less than or equal to", "Like", "Null". "Equal to" can match exact strings and numeric values, while other comparators, such as "Greater than" and "Less than", will work only with numerics. The "Like" operator allows the wildcard character [%] to be used at the start and end of a string value to match a column. The Null operator matches only null values, ignoring whatever the value is set to. Not all data sources support all comparators, meaning that it is likely that only a subset of the above comparators will be available to choose from.
  • Value: The value to be compared.

Combine Filters = drop-down

Select whether to use the defined filters in combination with one another according to either And or Or.

Limit = integer

Set a numeric value to limit the number of rows that are loaded.

Type = drop-down

  • External: The data will be put into your chosen S3 bucket and referenced by an external table.
  • Standard: The data will be staged on your chosen S3 bucket before being loaded into a table. This is the default setting.

Schema = drop-down

Select the table schema. The special value, [Environment Default], will use the schema defined in the environment. For more information on using multiple schemas, read Schemas.

Note

An external schema is required if the Type property is set to External.

Target Table = string

The name of the table to be created.

Warning

This table will be recreated and will drop any existing table of the same name.

Location = S3 bucket

An S3 bucket path that will be used to store the data. Once the data is on an S3 bucket, it can be referenced by an external table. This property is only available when the Type property is set to External.

S3 Staging Area = S3 bucket

Select an S3 bucket for temporary storage. Ensure your access credentials have S3 access and permission to write to the bucket. Read Manage Credentials for details on setting up access. The temporary objects created in this bucket will be removed again after the load completes, they are not kept.

Use Accelerated Endpoint = boolean

When True, data will be loaded via the s3-accelerate endpoint. Please consider the following information:

  • Enabling acceleration can enhance the speed at which data is transferred to the chosen S3 bucket. However, enhanced speed is not always guaranteed. Please consult Amazon S3 Transfer Acceleration Speed Comparison to compare S3 Direct versus S3 Accelerated Transfer speeds.
  • Users must manually set the acceleration configuration of an existing bucket. To learn more, see PutBucketAccelerateConfiguration in the API Reference, available at the AWS documentation.
  • This property is only available if the selected S3 bucket has Amazon S3 Transfer Acceleration enabled. For more information, including how to enable this feature, read Getting started with Amazon S3 Transfer Acceleration.
  • Cases may arise where Matillion ETL cannot determine whether the chosen S3 bucket has Amazon S3 Transfer Acceleration enabled. In these cases, Matillion ETL will reveal this property for user input on a "just in case" basis. In these cases, Matillion ETL may return a validation message that reads "OK - Bucket could not be validated." You may also encounter cases where, if you do not have permission to get the status of the acceleration configuration (namely, the permission, GetAccelerateConfiguration) Matillion ETL will again show this property "just in case".
  • The default setting is False.

Distribution Style = drop-down

  • All: Copy rows to all nodes in the Redshift cluster.
  • Auto: (Default) Allow Redshift to manage your distribution style.
  • Even: Distribute rows around the Redshift cluster evenly.
  • Key: Distribute rows around the Redshift cluster according to the value of a key column.

Note

Table distribution is critical to good performance. Read the Distribution styles documentation for more information.

Sort Key = dual listbox

This is optional, and lets users specify one or more columns from the input that should be set as the table's sort key.

Note

Sort keys are critical to good performance. Read Working with sort keys for more information.

Sort Key Options = drop-down

Decide whether the sort key is of a compound or interleaved variety.

Primary Keys = dual listbox

Select one or more columns to be designated as the table's primary key.

Load Options = multiple drop-downs

  • Comp Update: Apply automatic compression to the target table. Default is On.
  • Stat Update: Automatically update statistics when filling a table. Default is On. In this case, it is updating the statistics of the target table.
  • Clean S3 Objects: Automatically remove UUID-based objects on the S3 bucket. Default is On. Effectively, users decide here whether to keep the staged data in the S3 bucket or not.
  • String Null is Null: Converts any strings equal to "null" into a null value. This is case-sensitive and only works with entirely lower-case strings. Default is On.
  • Recreate Target Table: Choose whether the component recreates its target table before the data load. If Off, the existing table will be used. Default is On.
  • File Prefix: Give staged file names a prefix of your choice. When this Load Option is selected, users should set their preferred prefix in the text field.
  • Compression Type: Set the compression type to either gzip (default) or None.
  • Use Grid Variable: Check this checkbox to use a grid variable. This box is unchecked by default.

Encryption = drop-down

Decide how the files are encrypted inside the S3 bucket. This property is available when using an existing Amazon S3 location for staging.

KMS Key ID = drop-down

The ID of the KMS encryption key you have chosen to use in the Encryption property.

Auto Debug = drop-down

Choose whether to automatically log debug information about your load. These logs can be found in the task history and should be included in support requests concerning the component. Turning this on will override any debugging connection options.

Debug Level = drop-down

The level of verbosity with which your debug information is logged. Levels above 1 can log huge amounts of data and result in slower execution.

  1. Will log the query, the number of rows returned by it, the start of execution and the time taken, and any errors.
  2. Will log everything included in Level 1, plus cache queries and additional information about the request, if applicable.
  3. Will additionally log the body of the request and the response.
  4. Will additionally log transport-level communication with the data source. This includes SSL negotiation.
  5. Will additionally log communication with the data source, as well as additional details that may be helpful in troubleshooting problems. This includes interface commands.

Name = string

A human-readable name for the component.

Basic/Advanced Mode = drop-down

  • Basic: This mode will build a query for you using settings from the Data Source, Data Selection, and Data Source Filter parameters. In most cases, this mode will be sufficient.
  • Advanced: This mode will require you to write an SQL-like query to call data from NetSuite. The available fields and their descriptions are documented in the data model.

There are some special pseudo columns that can form part of a query filter, but are not returned as data. This is fully described in the data model.

Note

While the query is exposed in an SQL-like language, the exact semantics can be surprising, for example, filtering on a column can return more data than not filtering on it. This is an impossible scenario with regular SQL.

Use Sandbox = boolean

  • No: Connect to a live NetSuite account. This is the default setting.
  • Yes: Connect to a sandbox NetSuite account.

Authentication = drop-down

Select an OAuth entry to authenticate this component. An OAuth entry must be set up in advance. To learn how to create and authorize an OAuth entry, please read our NetSuite Query authentication guide.

Connection Options = column editor

  • Parameter: A JDBC parameter supported by the database driver. The available parameters are explained in the data model. Manual setup is not usually required, since sensible defaults are assumed.
  • Value: A value for the given Parameter.

SQL Query = code editor

Input an SQL-like query, written according to the data model.

This property is only available when Basic/Advanced Mode is set to Advanced.

Data Source = drop-down

Select a data source.

Data Selection = dual listbox

Choose one or more columns to return from the query. The columns available are dependent upon the data source selected. Move columns left-to-right to include in the query.

Data Source Filter = column editor

  • Input Column: Select an input column. The available input columns vary depending upon the data source.
  • Qualifier:
    • Is: Compares the column to the value using the comparator.
    • Not: Reverses the effect of the comparison, so "Equals" becomes "Not equals", "Less than" becomes "Greater than or equal to", etc.
  • Comparator: Choose a method of comparing the column to the value. Possible comparators include: "Equal to", "Greater than", "Less than", "Greater than or equal to", "Less than or equal to", "Like", "Null". "Equal to" can match exact strings and numeric values, while other comparators, such as "Greater than" and "Less than", will work only with numerics. The "Like" operator allows the wildcard character [%] to be used at the start and end of a string value to match a column. The Null operator matches only null values, ignoring whatever the value is set to. Not all data sources support all comparators, meaning that it is likely that only a subset of the above comparators will be available to choose from.
  • Value: The value to be compared.

Combine Filters = drop-down

Select whether to use the defined filters in combination with one another according to either And or Or.

Limit = integer

Set a numeric value to limit the number of rows that are loaded.

Table Type = drop-down

Select whether the table is Native (by default in BigQuery) or an external table.

Project = drop-down

Select the Google Cloud project. The special value, [Environment Default], will use the project defined in the environment. For more information, read Creating and managing projects.

Dataset = drop-down

Select the Google BigQuery dataset to load data into. The special value, [Environment Default], will use the dataset defined in the environment. For more information, read Introduction to datasets.

Target Table = string

A name for the table. Only available when the table type is Native.

Warning

This table will be recreated and will drop any existing table of the same name.

New Target Table = string

A name for the new external table. Only available when the table type is External.

Cloud Storage Staging Area = Google Cloud Storage bucket

The URL and path of the target Google Cloud Storage bucket to be used for staging the queried data. Only available when the table type is Native.

Location = Google Cloud Storage bucket

The URL and path of the target Google Cloud Storage bucket. Only available when the table type is External.

Load Options = multiple drop-downs

  • Clean Cloud Storage Files: Destroy staged files on Google Cloud Storage after loading data. Default is On.
  • Cloud Storage File Prefix: Give staged file names a prefix of your choice. The default setting is an empty field.
  • Recreate Target Table: Choose whether the component recreates its target table before the data load. If Off, the component will use an existing table or create one if it does not exist. Default is On.
  • Use Grid Variable: Check this checkbox to use a grid variable. This box is unchecked by default.

Auto Debug = drop-down

Choose whether to automatically log debug information about your load. These logs can be found in the task history and should be included in support requests concerning the component. Turning this on will override any debugging connection options.

Debug Level = drop-down

The level of verbosity with which your debug information is logged. Levels above 1 can log huge amounts of data and result in slower execution.

  1. Will log the query, the number of rows returned by it, the start of execution and the time taken, and any errors.
  2. Will log everything included in Level 1, plus cache queries and additional information about the request, if applicable.
  3. Will additionally log the body of the request and the response.
  4. Will additionally log transport-level communication with the data source. This includes SSL negotiation.
  5. Will additionally log communication with the data source, as well as additional details that may be helpful in troubleshooting problems. This includes interface commands.

Name = string

A human-readable name for the component.

Basic/Advanced Mode = drop-down

  • Basic: This mode will build a query for you using settings from the Data Source, Data Selection, and Data Source Filter parameters. In most cases, this mode will be sufficient.
  • Advanced: This mode will require you to write an SQL-like query to call data from NetSuite. The available fields and their descriptions are documented in the data model.

There are some special pseudo columns that can form part of a query filter, but are not returned as data. This is fully described in the data model.

Note

While the query is exposed in an SQL-like language, the exact semantics can be surprising, for example, filtering on a column can return more data than not filtering on it. This is an impossible scenario with regular SQL.

Use Sandbox = boolean

  • No: Connect to a live NetSuite account. This is the default setting.
  • Yes: Connect to a sandbox NetSuite account.

Authentication = drop-down

Select an OAuth entry to authenticate this component. An OAuth entry must be set up in advance. To learn how to create and authorize an OAuth entry, please read our NetSuite Query authentication guide.

Connection Options = column editor

  • Parameter: A JDBC parameter supported by the database driver. The available parameters are explained in the data model. Manual setup is not usually required, since sensible defaults are assumed.
  • Value: A value for the given Parameter.

SQL Query = code editor

Input an SQL-like query, written according to the data model.

This property is only available when Basic/Advanced Mode is set to Advanced.

Data Source = drop-down

Select a data source.

Data Selection = dual listbox

Choose one or more columns to return from the query. The columns available are dependent upon the data source selected. Move columns left-to-right to include in the query.

Data Source Filter = column editor

  • Input Column: Select an input column. The available input columns vary depending upon the data source.
  • Qualifier:
    • Is: Compares the column to the value using the comparator.
    • Not: Reverses the effect of the comparison, so "Equals" becomes "Not equals", "Less than" becomes "Greater than or equal to", etc.
  • Comparator: Choose a method of comparing the column to the value. Possible comparators include: "Equal to", "Greater than", "Less than", "Greater than or equal to", "Less than or equal to", "Like", "Null". "Equal to" can match exact strings and numeric values, while other comparators, such as "Greater than" and "Less than", will work only with numerics. The "Like" operator allows the wildcard character [%] to be used at the start and end of a string value to match a column. The Null operator matches only null values, ignoring whatever the value is set to. Not all data sources support all comparators, meaning that it is likely that only a subset of the above comparators will be available to choose from.
  • Value: The value to be compared.

Combine Filters = drop-down

Select whether to use the defined filters in combination with one another according to either And or Or.

Limit = integer

Set a numeric value to limit the number of rows that are loaded.

Schema = drop-down

Select the table schema. The special value, [Environment Default], will use the schema defined in the environment. For more information on schemas, read the Azure Synapse documentation.

Target Table = string

The name of the table to be created.

Warning

This table will be recreated and will drop any existing table of the same name.

Storage Account = drop-down

Select an Azure blob storage account with your desired blob container to be used for staging the data. Read the Azure documentation for help: creating an Azure Storage Account.

Blob Container = drop-down

Select a blob container to be used for staging the data. The blob containers available for selection depend on the chosen storage account.

Load Options = multiple drop-downs

  • Clean Staged Files: Destroy staged files after loading data. Default is On.
  • String Null is Null: Converts any strings equal to null into a null value. This is case-sensitive and only works with entirely lower-case strings. Default is Off.
  • Recreate Target Table: Choose whether the component recreates its target table before the data load. If Off, the existing table will be used. Default is On.
  • File Prefix: Give staged file names a prefix of your choice. Default is empty (no prefix).
  • Compression Type: Set the compression type to either gzip (default) or None.
  • Use Grid Variable: Check this checkbox to use a grid variable. This box is unchecked by default.

Distribution Style = drop-down

Select the distribution style.

  • Hash: This setting assigns each row to one distribution by hashing the value stored in the distribution_column_name. The algorithm is deterministic, meaning it always hashes the same value to the same distribution. The distribution column should be defined as NOT NULL, because all rows that have NULL are assigned to the same distribution.
  • Replicate: This setting stores one copy of the table on each compute node. For SQL Data Warehouse, the table is stored on a distribution database on each compute node. For Parallel Data Warehouse, the table is stored in an SQL Server file group that spans the compute node. This behavior is the default for Parallel Data Warehouse.
  • Round Robin: Distributes the rows evenly in a round-robin fashion. This is the default behaviour.

For more information, read Guidance for designing distributed tables using dedicated SQL pool in Azure Synapse Analytics.

Distribution Column = drop-down

Select the column to act as the distribution column. This property is only available when Distribution Style is set to "Hash".

Index Type = drop-down

Select the table indexing type. Options include:

  • Clustered: A clustered index may outperform a clustered columnstore table when a single row needs to be retrieved quickly. The disadvantage to using a clustered index is that the only queries that benefit are the ones that use a highly selective filter on the clustered index column. Choosing this option prompts the Index Column Grid property.
  • Clustered Column Store: This is the default setting. Clustered columnstore tables offer both the highest level of data compression and the best overall query performance, especially for large tables. Choosing this option prompts the Index Column Order property.
  • Heap: Users may find that using a heap table is faster for temporarily landing data in Synapse SQL pool. This is because loads to heaps are faster than to index tables, and in some cases, the subsequent read can be done from cache. When a user is loading data only to stage it before running additional transformations, loading the table to a heap table is much faster than loading the data to a clustered columnstore table.

To learn more, read Indexes on dedicated SQL pool tables in Azure Synapse Analytics.

Index Column Grid column editor

Name: The name of each column. Sort: Assign a sort orientation of either ascending (Asc) or descending (Desc).

Index Column Order = dual listbox

Select the columns in the order to be indexed.

Partition Key = drop-down

Select the table's partition key. Table partitions determine how rows are grouped and stored within a distribution. To learn more, read Partitioning tables in dedicated SQL pool.

Auto Debug = drop-down

Choose whether to automatically log debug information about your load. These logs can be found in the task history and should be included in support requests concerning the component. Turning this on will override any debugging connection options.

Debug Level = drop-down

The level of verbosity with which your debug information is logged. Levels above 1 can log huge amounts of data and result in slower execution.

  1. Will log the query, the number of rows returned by it, the start of execution and the time taken, and any errors.
  2. Will log everything included in Level 1, plus cache queries and additional information about the request, if applicable.
  3. Will additionally log the body of the request and the response.
  4. Will additionally log transport-level communication with the data source. This includes SSL negotiation.
  5. Will additionally log communication with the data source, as well as additional details that may be helpful in troubleshooting problems. This includes interface commands.

Variable exports

This component makes the following values available to export into variables:

Source Description
Time taken to stage The amount of time (in seconds) taken to fetch the data from the data source and upload it to cloud storage.
Time taken to load The amount of time (in seconds) taken to execute the COPY statement to load the data into the target table from cloud storage.

Strategy

Connect to the target database and issue the query. Stream the results into objects in cloud storage. Next, create or truncate the target table and issue a COPY command to load the cloud storage objects into the table. Finally, clean up the temporary cloud storage objects.

Snowflake Delta Lake on Databricks Amazon Redshift Google BigQuery Azure Synapse Analytics
✅ ✅ ✅ ✅ ✅
© Copyright 2024 Matillion Ltd | Legal | Privacy Policy | Disclaimer | Modern Slavery Statement